Zavio D-510E-varifocal lens Spécifications

1/3” CCD Indoor 3-Axis Dual Voltage True Day/Night IR Dome Camera Operation Instructions Model No. ED335 Please read this manual first for co

9 4. Remove dome cover (4 captive hex head screws); remove inner base from outer base (4 Phillips head screws – retain these for later re-assembly)

107. Attach power and video cables from source to cables from camera and push excess wire back into hole. 8. Insert inner base into outer base a

11 10. Once the camera view is as desired, attach the cover to outer base with the captive hex head screws.

12Installation - Flush Mount 1. Paste the drilling template on the ceiling or wall. Please refer to the drilling template below. 2. Use the app

135. Unscrew the 4 Philips screws (retain for future use) to detach the inner base from the outer base. Set aside the outer base.

147. Attach power and video cables from source to cables from camera and push excess wire back into hole. Fold the spring tabs up.

1510. The spring tabs will open automatically to support the camera against the ceiling. 11. Use the long Phillips pan head screws (x4) provide

1612. Attach video test cable to test point on rear of camera module. Aim and focus the camera. Remove test cable. 13. Screw the cover back to the

17 Headquarters Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 6

1 PRODUCT OVERVIEW ED335 is a new design IR Dome camera from Everfocus. It incorporates breakthrough DSP technology to provide brilliant color imag

2  Power supply pigtail  Video test cable Accessory pack #2 containing two flush mounting clips DIMENSIONS

3 SPECIFICATIONS Pickup Device 1/3” SONY Super HAD CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec; PAL: 625 TV

4 MAJOR PARTS: NAMES AND FUNCTIONS Front View Side View 2. IR LEDs 4. Light sensor 1. Outer Base 6. Focus Adjust 8. Video Output 9.

5 Back View 1. Base The camera unit sets in the dome base, when it is shipped from the factory. This base is used for surface mounting, a

6 7. Zoom Ring To adjust the viewing angle, loosen the zoom ring knob. Turn the ring toward <W> to Zoom out or <T> to Zoom in as necessa

7 3-AXIS GIMBAL BRACKET The 3-axis gimbal enables installers to easily mount the camera on a wall or ceiling and then using the built in tilt and d

8 INSTALLATION An ED335 camera may be mounted in two ways: surface mount and flush mount. Select the one that meets your needs. Installation - Su